{"product_id":"ventcore-filtration-chamber-heating-snapmaker-u1","title":"VentCore – Filtration \u0026 Chamber Heating System for Snapmaker U1","description":"\u003ch2\u003eBreathe easy. Print better.\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eVentCore \u003c\/strong\u003eis a purpose-built filtration, heating, and cooling system designed specifically for the Snapmaker U1 and compatible printers. It keeps your ambient air clean, your print chamber warm, and your motherboard cool, controlled via Klipper, with zero permanent modifications to your machine.\u003c\/p\u003e\n\u003ch2\u003eWhy VentCore?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCleaner Air:\u003c\/strong\u003e High-efficiency HEPA filtration combined with an activated charcoal chamber scrubs harmful VOCs and ultra-fine particles (UFPs) generated during printing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBetter Prints, Less Warping:\u003c\/strong\u003e Maintains a consistent chamber temperature to drastically reduce warping and improve layer adhesion when printing engineering filaments like ABS, ASA, and Nylon.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLonger Printer Life:\u003c\/strong\u003e A dedicated external cooling fan targets the motherboard, preventing heat creep and reducing wear on critical electronics over time.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomated:\u003c\/strong\u003e Klipper integration activates and deactivates the system based on your nozzle temperature. Set it once and forget it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOpen-Source \u0026amp; Customisable:\u003c\/strong\u003e Includes full STEP files and Klipper configuration macros so you can adapt, remix, and tune every part to your specific setup.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean, Plug-and-Play Integration:\u003c\/strong\u003e All three modules pull control\/power via the printer’s existing 6-pin port (with a separate dedicated supply for the heater). No permanent wiring cuts or splices required.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ch3\u003eModule 1 — Active Air Filtration\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFilter:\u003c\/strong\u003e 15 mm HEPA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdsorbent:\u003c\/strong\u003e Activated charcoal chamber (charcoal pellets not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFan:\u003c\/strong\u003e 80 × 80 × 15 mm PWM 4 pin fan (2.5 mmH₂O static pressure, 29 CFM)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower\/Speed:\u003c\/strong\u003e 12 V, 0.15 A | 3,000 RPM | Hydraulic Bearing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNoise:\u003c\/strong\u003e 34.5 dB(A)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eModule 2 — Chamber Heating\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeater Type:\u003c\/strong\u003e PTC Ceramic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower \/ Voltage:\u003c\/strong\u003e 200 W \/ 24 V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Supply:\u003c\/strong\u003e Dedicated 24 V \/ 10 A power supply included in the ki)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eModule 3 — External Motherboard Cooling\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFan:\u003c\/strong\u003e 40 × 40 × 28 mm PWM static pressure 4 pin fan (4.2 mmH₂O static pressure, 7.1 CFM)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower\/Speed:\u003c\/strong\u003e 12 V, 1.2 W | 6000 RPM | Dual Ball Bearings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNoise:\u003c\/strong\u003e 20 - 25 dB(A)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSystem Control\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInterface:\u003c\/strong\u003e Klipper (macro available)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrigger:\u003c\/strong\u003e Nozzle temperature threshold (Default: 50 °C)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower (Modules 1 \u0026amp; 3):\u003c\/strong\u003e Powered via Snapmaker U1 6-pin port\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower (Module 2):\u003c\/strong\u003e Powered via dedicated external supply but triggered by Klipper\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat’s Included in the Kit\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1× 80 mm PWM fan (Air Filtration)\u003c\/li\u003e\n\u003cli\u003e1× 40 mm PWM fan (Motherboard Cooling)\u003c\/li\u003e\n\u003cli\u003e1× 15 mm thick HEPA filter\u003c\/li\u003e\n\u003cli\u003e1× Digital temperature controller\u003c\/li\u003e\n\u003cli\u003e1× 200 W PTC heater + Dedicated Power Supply\u003c\/li\u003e\n\u003cli\u003e1× 5-channel PWM fan hub\u003c\/li\u003e\n\u003cli\u003e1× 24 V to 12 V step-down converter\u003c\/li\u003e\n\u003cli\u003eAll required wires \u0026amp; connectors (including 6-pin 2×3P connector)\u003c\/li\u003e\n\u003cli\u003eComprehensive Assembly Guide (Online copy)\u003c\/li\u003e\n\u003cli\u003eReady-to-go Klipper configuration code (Available here)\u003c\/li\u003e\n\u003cli\u003eSTEP files for all 3D printed structural components (Available on Makerworld and Printables).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e⚠️ \u003cstrong\u003eIMPORTANT NOTE:\u003c\/strong\u003e To fully utilise this system, a printer top cover enclosure is required. You can download my remixed, optimized version of Alexis Melo’s “Ikealler” enclosure for free to print yourself and complete the setup!\u003c\/p\u003e","brand":"Stratum Element","offers":[{"title":"All modules","offer_id":54214056771917,"sku":null,"price":59.14,"currency_code":"GBP","in_stock":true},{"title":"Filteration Only","offer_id":54214056804685,"sku":null,"price":13.8,"currency_code":"GBP","in_stock":true},{"title":"Heating Only","offer_id":54214056837453,"sku":null,"price":49.32,"currency_code":"GBP","in_stock":true},{"title":"Cooling Only","offer_id":54214056870221,"sku":null,"price":14.33,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/5846\/1773\/files\/20260627_162145_jpg.jpg?v=1782934538","url":"https:\/\/stratumelement.com\/products\/ventcore-filtration-chamber-heating-snapmaker-u1","provider":"Stratum Element","version":"1.0","type":"link"}